Ghost II Immobiliser

Secure your vehicle from key-cloning, hacking and theft. ghost immobiliser car and unnoticeable to thieves because it doesn’t use LED indicators or key fob tags to alert thieves that it’s there.

It can also be temporarily disabled by using Transport Mode in situations like vehicle transportation or when your vehicle is being repaired.

Simple PIN code Change Process

Ghost is the next generation of security device. It can secure your vehicle without cutting wires, or adding an aftermarket immobiliser, or alarm key fobs. It connects directly to your vehicles CAN Data Network and a personalized PIN Code can be programmed in it using the buttons of the factory on the steering wheel and dash. This code prevents the engine from starting and is not detected by any RF scanning technology or code-grabbing technology used today.

The system is equipped with an emergency pin code override, in the event that a user forgets their pin code or the programming key becomes inoperative. It also has the Service/Valet Mode, which allows the vehicle to be temporarily started and driven without needing a valid code, making it ideal for transport or maintenance.

The UK automotive aftermarket, though flourishing, isn’t immune to theft. Thieves can easily bypass most traditional deterrents, like locking your steering wheel and your wheels by hacking into the OBD port of your vehicle. This can be done using an laptop, a USB cable, and a low-cost OBD scanner that can be purchased online for under PS50.

In order to avoid theft, it’s essential to take steps to protect your vehicle from theft by using an immobiliser ghost II. It is a discreet device that can help to protect your vehicle from theft and is simple to use once you’ve got your PIN code. The device is inside a small box which can be connected to the wiring harness of your vehicle. It can be installed anywhere on your vehicle and is weatherproof. This makes it hard for thieves to locate. The device is also easy to install and is backed by a guarantee.

Small, weatherproof device

The device connects into the CAN data network of your vehicle without cutting any wires and works silently. The device can be programmed with a an individual PIN by using the buttons on your dashboard or steering wheel. This will help prevent theft. The device is equipped with a GPS tracker integrated into. Many insurance companies for cars recommend it. It can be activated using an app on your phone. It is weatherproof and can be concealed inside the car so that it is nearly impossible for thieves.

Ghost ii is silent, in contrast to traditional systems that can be heard by criminals. It requires 4 to 21 press on the vehicle’s buttons. This can be set by the owner of the vehicle to their preference and the sequence can’t be cracked. There is a free mobile phone app that can be used to disarm the system, and in the event that you decide to sell your vehicle, there is an official reset code that can reset the immobiliser on the CAN bus.

Modern thieves utilize diagnostics to spot circuit breaks on modern cars. The Ghost, however, does not have any. Therefore, it is a truly secure and foolproof system that can be put in inside the vehicle by our skilled team of CANbus immobiliser fitters.

The Ghost can be used with any vehicle, in contrast to other CANbus immobilisers which may require a key fob. Its technology is so advanced, it is able to protect against a variety of security threats including attacks on signal relays and ECU switching. It is compatible with a wide range of smartphones and can send notifications to owners when their vehicle is being driven in a way that is not authorized.

Tested for each vehicle

Ghost is the only immobiliser on the market that protects your vehicle from key hacking, cloning, and even theft of keys. A criminal would need to physically remove the device from your car and then transport it to a trailer and reinstall it on a different vehicle to take over the Ghost secured vehicle. It also offers protection against the use of jumper cables, wheel locks, cables and universal keys.

This system is incredibly easy to set up and operates without a sound. It connects to the CAN data circuit of your vehicle allowing it to communicate directly with your ECU (Engine Control Unit). It is completely sealed and small that it can be tucked in your vehicle harness and put in any place, making it virtually impossible for a thief to recognize.

Once it is installed, it stops your vehicle from starting until the specific disarming sequence is entered by pressing the buttons on the steering wheel, door panels, or the centre console. You can set it up to 20 digits in length and decide how secure you’d prefer to be. You can also use it to enable a service/valet option, which allows you to temporarily start your vehicle and drive it without entering your PIN.

It is it’s CAN data circuit, which means there are no radio frequencies, like a traditional immobiliser. This means that a burglar can’t listen to the relay and attempt to decipher the PIN code that is entered. It does not have circuit breaks and cannot be detected using diagnostic tools, RF scanning or code-grabbing technology.

Boundary Car Care is proud to be an authorized installer of this amazing product. We are very impressed with its performance and the peace-of-mind it gives our customers. It really is a great solution for protecting your pride and joy during these troubled times.

Emergency Pin Code Override

The Ghost immobiliser prevents your car from starting without the correct PIN code. It is weatherproof and tamperproof. It’s hidden in your vehicles wiring harness and uses the buttons on your steering wheel / dashboard to create an unique code sequence that needs to be entered to start your vehicle. It’s not a Thatcham device, since it does not use LED indicators and is connected to your vehicle through the CAN system. This makes it impossible to track by professional thieves who are able to detect alarm/immobiliser systems on modern vehicles by using accessible diagnostic tools.

If you’d like to temporarily disable your Ghost immobiliser, it can be activated by entering an emergency code to override the app on your smartphone. This allows you to lend your vehicle to a friend, family member or valet without sharing your pin number. This is ideal for situations such as servicing, or if you need to leave your car at valet parking or a garage.

Ghost can also be utilized with a driver fob, which gives you the flexibility of being able to start your vehicle with either your key or the app. This is ideal for parents with children who are young and want to drive the car or you’re unable to enter your pin number quickly or would like to use the vehicle in an emergency, such as an accident.

With a simple PIN change procedure, a user-friendly interface, and multiple security features, there’s not surprising that the Ghost immobiliser is endorsed by a variety of insurance companies and secured by a warranty. Its sleek, compact design and seamless integration with your vehicle’s existing systems make it a vital accessory to any performance or classic vehicle.

Service/Valet Mode

The Ghost immobiliser can prevent theft of vehicles by blocking the communication between the key and the ECU. This means that the engine cannot be started without a specific PIN. It’s also hidden within the wiring allowing it go unnoticed and it does not use LED indicators that could signal its presence. This is perfect for the time you need to hand over your vehicle to a mechanic or even valet parking. To enable valet mode, simply enter the code that was provided to you by your engineer on the completion of installation – this will enable them to start your car without having to go through the sequence to disarm. To exit valet mode, put your car back into normal operation and the code will automatically change to your normal pin.

Ghost is designed to integrate with your car’s CAN bus system unlike other security products that rely on buttons or key-fobs. This provides it with unrivalled security against modern methods of theft, such as key cloning and hacking.

Once installed, your engineer will guide you on how to arm, disarm and valet mode your vehicle. All of this is done through your smartphone app. Your engineer will assign your unique pin that is simple to remember and mathematically impossible for thieves to guess, however should you forget it, don’t fret because every installation includes an Emergency PIN Code override that allows you to return your vehicle to action.

Our installers have been trained and are able to install your Ghost correctly. All installations are performed on the premises of the customer. We also offer a walk-through on how to use the device as well as a mobile application. Once Ghost is installed, we will guarantee the performance of the device.