Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The innovative Ghost immobiliser shields your precious car from key-long and relay theft. With ghost 2 immobiliser problems personalised PIN sequence, unless you know the code your vehicle won’t start!

Transport Mode allows you to temporarily disable the device, which is perfect for vehicle transport and servicing. It can be activated again by entering a different PIN code.

No Key Fobs or Indicators with Leds

The Ghost 2 immobiliser offers a powerful defence against modern car-theft techniques. Its invisible and engine start blockage reduces the risk of theft, providing peace of mind and saving money on insurance.

It does not emit radio frequency signals, which makes it undetectable by traditional scanners. It is also not hacked by using standard methods like key cloning or signal jamming. The device uses existing buttons in your vehicle, such as those on the steering wheel, door panels, and the centre console to generate an unique, customizable PIN code sequence that can be up to 20 presses in length. Only the owner of the vehicle is able to start the engine when the correct sequence or beacon or mobile application is employed. This provides an extra layer of security against thieves.

You can also turn on a convenient service mode for situations such as valet parking or maintenance that require you to temporarily disable the system. The mobile app makes it simple to do this, and ensures that your vehicle is safe during the time it is being repaired. When the work is done it is simple to switch back to secure mode. This ensures that your vehicle is secured in all times.

Unlike other aftermarket immobilisers that use fobs The Ghost 2 can be operated directly through the vehicles existing buttons, making it far simpler to use than traditional systems. The app can also function as a spare key in emergency situations that allows you to drive with the security off without needing to enter your PIN code.

No Radio Frequency Signals

In contrast to traditional security systems that have their own dedicated remote The Ghost 2 immobiliser doesn’t require any additional key fobs, and can be used with existing buttons on the steering wheel or the centre console. The device is undetectable by thieves using RF scanning technology or code grabbing, which means your car won’t even start should they steal your key.

The device locks the engine using a unique sequence of buttons. This pin code is entered either on the app or using the buttons on the steering column or the center console. You can also lock the gearbox to ensure that your vehicle is not able to be driven until you have your key or pin code. The device can be set to transport mode to allow you to drive the car without having to enter your pin code. This provides additional security for your vehicle when it is parked in a valet or service.

The Ghost 2 immobiliser is designed to serve as a deterrent for theft that is as discreet as possible, which makes it an appealing alternative for those who have spent an enormous amount of money personalizing their cars or own very expensive or rare cars. Many have reported that this device is a great option to stop their cars from being stolen. Many have shared stories of attempted thefts of cars which were thwarted by the device. The Ghost 2 is also very versatile. Customers report that it can be used with their regular keys as well as with the emergency button on their vehicle, providing them with security when they’re not in their car.

No Radio Frequency Scanners

Protect your vehicle from hacking, key cloning and key theft by using a Ghost immobiliser. The system utilizes the buttons on your dashboard and the steering wheel to create a unique sequence of buttons that you can only recognize. Your car won’t start without this sequence. The combination of a unique disarm sequence and the absence of radio frequency signals makes the device difficult to penetrate or evade.

Contrary to the Thatcham-approved devices that rely on radio frequency scanning the Ghost CAN Immobiliser works silently and without any external signals to perform its magic. It’s a safer option and is insured if installed by an approved installer of TASSA (we are one of them!) ).

It is highly recommended that you hire a professional installer install the Ghost immobiliser. This is due to the way it integrates with the vehicle. This ensures that it is integrated seamlessly with the vehicle’s systems, resulting in maximum performance and a substantially less risk of failure.

Furthermore, professional installation typically comes with warranties and support that further increase the value of your investment. This is a major deterrent to potential thieves who are less likely than before to attempt to evade the device due to its extensive security features.

The Ghost is not just an excellent deterrent for thieves, but it’s designed to be simple to use. It can be set to automatically rearm for a set amount of time after parking your car. This means that you don’t have to keep track of your PIN every time. It also offers the option of Service/Valet Mode in the event that you have to hand your vehicle over to service or valet parking. It can be enabled or disabled according to your preferences using an easy indication sequence.

No Wire Cutting

The Ghost 2 is non-invasive and doesn’t require wire cutting during installation. It connects to the CAN data network of your vehicle and is programmable with an unique PIN code. This will prevent anyone else from starting the engine if they do not have a personalised sequence of PINs or an app authorisation.

It’s also silent since it doesn’t emit radio signals like other immobilisers. It is weatherproof, sealed, and small enough to be concealed inside the vehicle.

The Ghost II also has the possibility of being placed into a ‘transport mode,’ which allows it to be used for short periods of time without the requirement of a personal PIN. This is a great option in situations such as lending the car to a family or friend member or in an emergency situation. You can start your vehicle quickly and securely.

When installing the Ghost II, it’s important to work in a well-lit space and wear protective gear when working with tools and electrical components. A basic set of tools can help you to make precise connections. A multimeter can help verify electrical values, and ensure that your wiring is safe. Insulation tape and cable tie can be used to shield any wires that are cut or exposed or to join them during the installation.

It is essential to disconnect the battery of your vehicle prior to beginning any wiring work. This will prevent any airbag deployments and electrical shocks if the Ghost II is connected to the vehicle’s electrical system while the battery is disconnected.

Easy to Install

The Ghost immobiliser, a distinctive device that is the next generation, functions by connecting directly to your vehicle’s CAN Data Network. It utilizes a unique pin code to block it from getting started. This makes it far harder to crack than conventional alarm systems or aftermarket key fobs and offers superior security against key cloning hacking and relay attacks.

The device can be hidden within your vehicle, and it makes use of the buttons on your steering wheel and dashboard to create a unique sequence you can only recognize. This prevents thieves using a stolen car key to open it and also wards off the use of an instrument for diagnosing that thrives on hacking OBD.

Installation is simple and does not require cutting wires. The unit is connected to the vehicle’s CAN bus via an unchanging 12V supply and a grounding connector. Basic hand tools are sufficient to install the unit, and a multimeter can assist with pinpointing the correct wires. Insulation tape or heat shrink tubing is recommended to protect the connections, and cable ties are a good option to keep the wiring neat and tidy.

Once it is installed, the device is put into a learning mode that records your specific sequence of buttons or sequences to generate your unique pin code. The information is stored in the CAN data network, which makes it impossible for anyone else to replicate your sequence and even start your vehicle.

Transport Mode is a function that can be used in an emergency if you forget your PIN number, sell your vehicle, or the button is not working. This will shut down the Ghost System completely, but it will automatically reactivate when you go over 31mph for longer than 15 minutes or enter your PIN Code. This is ideal for people who frequently rent their vehicles through services like Turo or ZipCar.