Autowatch Ghost Immobiliser Installation

The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It’s discreet, doesn’t use LED indications or key fobs and is concealed in the wiring of the vehicle.

It also allows users to disable the system temporarily through Transport Mode in the event of renting out their vehicle. This guide will take you through the process of installing a Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser is a modern security device that guards your vehicle from hacking, key cloning and relay attacks. The system links directly to your vehicle’s ECU and is protected by a unique PIN code of your choice. It’s undetectable to thieves using diagnostic scanners or other advanced methods, and is unable to be disabled by cutting circuits.

The system is easy to use, however professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the security package for your vehicle.

To prevent an accidental deployment of short circuits or airbags, the installer must first remove your battery. Once this is done the installer is now able to begin work. Basic hand tools can be used to make precise connections. A multimeter is useful to check electrical values. Cable tie and insulation tape are crucial to ensure connections are secure and ensure that wiring is neat. The Ghost Immobiliser user manual will provide specific guidelines tailored to your model.

During the installation, it is crucial to select the right grounding location that is free of debris and paint. The installer must also make sure the immobiliser’s CAN H and CAN L wires are connected to the appropriate ports on your vehicle’s ECU. The wires can be connected or soldered based on the model. To ensure a stable and long-lasting connection, it is recommended that you choose a top-quality plug.

Once the install is complete Once the installation is completed, the customer can enable Transport Mode. This allows valet parking or mechanics to use the vehicle, without knowing the pin code. The customer has to press the service icon on the dashboard five times over two seconds. The system will confirm this by showing five indicators.

The Autowatch Ghost 2 is a highly effective immobiliser that’s TASSA verified and Thatcham approved. It’s a great option for those who rent out their vehicles often on platforms such as Turo. Having an immobiliser can also lower insurance costs since it greatly reduces the chance of theft.

Getting Started

You won’t have a problem using an autowatch immobiliser for those who want to safeguard your vehicle from theft. It prevents your car from starting even the case that someone steals or copies your key. This is due to its high-tech technology that is designed to stop the car’s engine from starting until the correct PIN code is entered.

The device connects to the vehicle’s bus network, CAN and allows direct communication with the ECU. It makes use of the buttons on your dashboard and steering to create a unique sequence, which only you are aware of. This makes it impossible for anyone else to start your car. This is the most secure security system to protect your car’s pride and joy, keeping its value intact should you decide to sell it in the future.

Installing a ghost immobiliser is an easy process, however, it is important to follow the steps carefully to avoid electrical issues and system malfunctions. You must first find a 12V power source and a suitable grounding for the car’s chassis. Then, you can begin connecting the wires for the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a strong connection. Insulate the connections using heat shrink tubing or insulation tape, or other materials to prevent electrical short circuits.

Once the wires are connected, you are able to connect the battery and start the engine to determine if the immobiliser is working. After you’ve verified that everything is working properly, you can install the immobiliser in a safe location in the vehicle. Make sure to hide it in a secure manner to prevent a thief from tampering with it.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it is in compliance with the highest standards of security and is a great deterrent to car thieves. It is resistant to hacking and key cloning and is not able to be disabled without the code. The device is easy to use and can be set into an option for a service valet so that your vehicle will not be activated if you bring it to an MOT or for servicing.

Wiring

The Ghost Immobiliser, a cutting edge security system, is designed to deter theft of vehicles. It communicates with your vehicle’s ECU and connects directly to its CAN bus. The Ghost Immobiliser does not interfere with the factory settings of your car, unlike other aftermarket systems that require the removal of circuit elements.

The system is also inaccessible by thieves using diagnostic scanners. The system doesn’t send or receive radio frequency signals and instead uses CAN data for communication with your ECU. It doesn’t even require any modifications to your current key fobs.

To utilize the Ghost Immobiliser, simply switch on the ignition in your car and enter your disarm sequence (either one or two buttons). The indicator will flash two times to verify that you have entered the correct code. You are now able to start your vehicle and drive safely.

Once installed, Ghost Immobiliser safeguards your vehicle against hacking or key cloning, while also protecting its value. If you have to surrender your car to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.

You’ll require a constant power source (12V) and a grounding source to complete the installation of a Ghost immobiliser. Be sure that they are well-insulated and safe to touch. Cable ties are also recommended for bundling and securing the wires. This reduces the risk of theft by potential thieves. Make sure you verify the locations of these points to avoid committing a mistake and mark them with an adhesive or label. It’s important to check all connections for signs of wear and tear. Make sure that all connections are securely in place and properly insulated. Also, don’t forget test the Ghost Immobiliser after installation is complete. This will ensure that the unit is functioning correctly, and that all connections are safe and well-insulated. Be sure to correct any problems immediately.

Testing

The Autowatch Ghost Immobiliser is a cutting-edge car security system that seamlessly into your car’s ECU to prevent unauthorised engine start. Its innovative technology safeguards your vehicle from key cloning and hacking along with other common methods employed by thieves to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to offer the ultimate protection for your vehicle. The Ghost’s unique features and secluded design make it a preferred choice for car lovers and security-conscious drivers too.

It is important to follow the steps of installation to ensure the correct integration of the Ghost Immobiliser. ghost 2 immobiliser problems to begin is to look over the vehicle’s wiring diagram, which will serve as a roadmap for locating and connecting the required wires. Then, you’ll need to identify the power source as well as grounding points. Once you’ve located them, you’ll have to mark them so that they are easy to identify during installation. It is also essential to use high-quality tools and materials. Basic hand tools can help to make precise connections, while a multimeter will verify electrical values and ensure security. Cable tie and insulation tape will keep all connections neat. A Ghost-specific user manual is also available.

It is crucial to test the system prior installing it. Enter the PIN code into the system and then start the vehicle. This will ensure that the immobiliser functions according to plan, and prevents unauthorised vehicle start-ups. This procedure should be carried out regularly as part your regular vehicle inspections in order to ensure that the system is always working correctly.

Once the installation is complete After the installation is completed, you are able to drive your car with confidence. The Ghost will protect your car from thieves who might steal your car. It will ensure that no one is able to take your car away if they do not have the correct PIN code. The Ghost can also be used with a tracker that is approved by Thatcham to identify any attempts at tampering or theft and allow you to track your vehicle if it is stolen.

The Ghost can be utilized on a wide range of vehicles and is compatible with all major manufacturers. If you are interested in securing your car with this cutting-edge device, call Monty’s Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which assures us that we follow strict guidelines for the installation of our products. This assures insurance companies, customers and law enforcement officials that all installations are completed safely and correctly.