Ghost II Immobiliser

Guard your vehicle from key-cloning, hacking and theft. It’s silent and undetectable to a would-be thief because it doesn’t utilize keys-fob tags or LEDs to let them know it’s there.

It can also be temporarily disabled using Transport Mode for scenarios like transporting vehicles or when your vehicle is being serviced.

Simple change of PIN code

Ghost is a revolutionary next generation security device that is able to secure your vehicle without cutting wires or adding aftermarket alarm keys for immobilisers. It connects directly to the vehicle’s CAN Data Network. A personalised PIN code can be programmed by using the factory buttons on the dashboard and the steering wheel. This code will prevent the engine from starting and is undetectable by any RF scanning technology or code-grabbing technologies used today.

The system has an emergency pin code override in case the user forgets their code or a key to program is lost. It also features a Service/Valet Mode that allows the vehicle to be started temporarily and driven without needing the use of a valid code. This makes it ideal for transport or maintenance.

While the UK automotive aftermarket is growing however, it’s not completely safe from theft. The OBD port in your vehicle can be hacked by thieves to avoid traditional deterrents such as locking your steering wheel and wheels. This can be done using the use of a laptop, USB cable, and a low-cost OBD scanner available on the internet for less than PS50.

It is crucial to safeguard your car with an immobiliser for Ghost II to avoid theft. It’s a small device that will help to prevent theft of vehicles. Once you have your PIN code it’s simple to use. The device is contained inside a small box that can be attached to the wiring harness that is on your vehicle. It can be installed anywhere on your vehicle and is weatherproof. This makes it difficult for thieves to locate. In addition the device is simple to install and comes with a guaranty.

Weatherproof, tiny device

The device connects into the CAN data network of your vehicle without cutting any wires and is completely silent. The device can be programmed to provide a a unique PIN using the buttons on your dashboard and the steering wheel. This can prevent theft. The device has an GPS tracker built-in. Many insurance companies for cars recommend it. It can be activated by an app on your phone. It is weatherproof and can be concealed in the vehicle which makes it virtually impossible for thieves to locate.

Ghost ii is silent, in contrast to traditional systems that are heard by criminals. It requires between 4 and 21 button presses on the vehicle’s buttons. ghost 2 immobiliser near me can modify the sequence according to their preference and it’s not susceptible to being hacked. There is a mobile phone App that can be used to disable the system, and if you decide to sell your car, there is an official reset code that resets the CAN bus immobiliser.

Modern thiefs are able to utilize diagnostics to identify circuit cuts on modern cars however, the Ghost is not equipped with circuit cuts. This makes it an extremely secure and reliable system that can be fitted on the vehicle by our skilled team of CANbus immobiliser fitting technicians.

Unlike other CANbus immobilisers, which require a key fob and a key fob, the Ghost is compatible with all kinds of vehicles. The technology behind it is so advanced that it can protect against a variety of security threats, such as signal relay attacks and ECU swapping. It is compatible with a wide range of smartphones and can issue warnings to owners in the event that their vehicle is driving in a way that is not authorized.

Each vehicle is tested

Ghost is the only immobiliser on the market that can protect your vehicle from key cloning, key hacking and even theft of keys. To steal a Ghost-protected car, a thief must physically remove the device and take it to a trailer. It also guards against the use of wheel locks as well as jumper cables and universal keys.

This extremely simple to install system works quietly and connects to your vehicle’s CAN data circuit, making it possible to communicate directly with the ECU (Engine Control Unit). It is so small and sealed that it can be installed anywhere inside your vehicle.

Once installed it prevents the vehicle from starting unless the unique disarm sequence is entered using the buttons on your vehicles steering wheel or door panels, or on the central console. It can be set up to 20 numbers long and allows you to select the level of security you wish to be. It can also be used to activate a Service/Valet mode which allows you to temporarily start and drive your vehicle without entering your PIN.

Since it is based on the CAN data circuit, there are no radio frequency signals as an immobiliser relay that is traditional which means that thieves can’t listen to the relay in order to try and decipher what PIN code is being entered. It also doesn’t have any circuit breaks and cannot be detected by diagnostics tools or code-grabbing technology or RF scanning.

Boundary Car Care is proud to be an approved installer of this fantastic product. We are incredibly impressed with its performance as well as the peace of mind it provides our customers. It’s a great method to protect your confidence and joy in these difficult times.

Emergency Pin Code override

The Ghost immobiliser is a tamper-proof and weatherproof device that stops your vehicle from starting if you don’t have a correctly entered PIN code. It is concealed in your vehicle’s wiring harness. It makes use of buttons on the steering wheel or dashboard to generate an unique code sequence. It’s not a thatcham device, since it does not have LED indicators and is connected to your vehicle via the CAN system. This makes it inaccessible by professional thieves who are able to detect alarm/immobiliser systems within modern vehicles by using the readily available diagnostic tools.

If you’d like to temporarily disable your Ghost immobiliser it can be turned off by entering an emergency override code in the app on your smartphone. This allows you to loan your vehicle to a friend, valet, or family member without sharing your pin number. It is perfect for situations like maintenance, or when you have to leave your car at a garage or valet parking.

Ghost can also be used with a driver fob, that gives you the convenience of being able to start your vehicle with either your key or the app. This is a great option if you want to give your child the keys to the car, or if you’re unable to input the pin number in a quick manner.

It’s not a surprise that the Ghost immobiliser is a simple PIN-change procedure, user-friendly interface, and numerous safety features, is recommended by many insurance companies. It is also backed by a guarantee for security. Its sleek, compact and seamless integration into your vehicle’s current systems makes it a vital accessory for high-performance or vintage cars.

Service/Valet mode

The Ghost is an immobiliser that prevents vehicle theft by blocking the communication between your key and the ECU which means that the engine cannot be started without entering a unique PIN code. It’s also hidden in the wiring, making it difficult to spot. It does not have LED indicators that could reveal its position. This is ideal the time you need to hand over your car to a mechanic or valet parking. Enter the code provided by your engineer at the time of installation to enable valet mode. This will allow them to start your vehicle without the need to enter the disarm sequence. To exit valet mode simply put your car back into normal operation and the code will automatically change back to your normal pin.

In contrast to other security devices that rely on vehicles keys or buttons, Ghost is designed to be integrated into your cars CAN bus system. This gives it unparalleled protection against the latest theft techniques like key cloning and hacking.

Once installed the engineer will demonstrate how to arm, dearm and valet your vehicle. All of this can be done through your smartphone application. Your engineer will create a unique pin that is easy to remember, yet mathematically unattainable for thieves. If you forget it you don’t have to worry because every installation comes with a Emergency PIN Code Override to make sure your vehicle is working.

Our installers have been fully trained and are qualified to install your Ghost correctly. All installations are performed at the location of the customer. We also offer a walk-through on how to use the device and mobile application. Once Ghost is installed, we guarantee its performance.