Ghost Immobiliser Fitter

Ghost immobilisers are among the most effective methods to safeguard your vehicle from theft. They prevent vehicles from starting until the proper pin code is entered. They can also be used to track a car remotely. They are getting more and more popular and insurance companies are offering discounts to drivers with these systems.

It is tamper proof

The Ghost Immobiliser is a sophisticated security device, stops your car from starting without a unique PIN or beacon. The system can be modified to fit your vehicle and is highly effective as an anti-theft solution. After installation, it’s crucial to test the system to ensure that it’s functioning properly. By entering the PIN when you start the engine is a straightforward method to verify that the system is installed correctly. Regular testing will help to identify any problems or issues with the system early.

The system communicates directly with the ECU and will not allow your car to start unless you enter the proper sequence. This can be accomplished using the electronic buttons on your steering wheel or through an app for smartphones. Its low profile and tamper-proof design make it difficult for thieves to steal. It can be used combination with a beacon for tracking the location of your vehicle. It is an excellent option to safeguard valuable vehicles that have been modified, or for people who want to protect their expensive or valuable vehicles.

This tamper-proof device utilizes the buttons on your steering wheel to create an exclusive sequence known only by you. The sequence is mathematically difficult for thieves to guess and is easily changed by using a reset code. It can be easily installed by a technician on the majority of automobiles.

After installing the device you’ll be required to connect it to a power source and grounding point. To determine the wires needed to connect it, obtain the wiring diagram of your vehicle. To avoid short circuits or electrical damage, insulate all connections using heat-shrink tubing or insulation. Check the mounting of the device and its connections to make sure there aren’t any signs of tampering.

Ghost 2 can be set in Service/Valet Mode to older vehicles that require battery isolation during maintenance or servicing. This will disable the device with an unique pin code. This will stop it from being turned on again by thieves.

It’s wireless.

Ghost immobilisers aren’t spotted by thieves, in contrast to other anti-theft devices. They can be fitted in a variety of vehicles and shield them from hacking, key cloning, and signal relay attacks. They can also be used to remotely track a vehicle. They can provide owners with instant notifications when their vehicle is stolen. This is among the most effective ways to stop car theft and certain insurance companies offer discounts to customers who install them.

autowatch ghost immobiliser cost is an affordable and simple solution to ensure your vehicle is secure from theft. It is wireless and is compatible with all automobiles. It is weatherproof and tamperproof making it a good choice for any vehicle. It also comes with a 3-year warranty. The Ghost II is unlike other security devices in that it does not require any additional wiring or other external components. Its unique pin code sequence guards your vehicle from key theft and key cloning by blocking the engine from starting without a disarm code is entered. The sequence could range from one to twenty buttons, which means that thieves will have to wait longer before attempting the crack the code.

The Ghost II can also block signals from a thief’s key fob. It can determine if a key fob is cloned, or hacked and disable the engine by triggering an alarm. It can also prevent the use of the signal relay device which is often used by organized car-thief gangs to gain entry to vehicles.

It is crucial to test the Ghost Immobiliser system to ensure that it is functioning properly. This will help you identify any issues early and fix them before they become a major issue. As part of your regular vehicle inspection, it’s a good idea for you to test the system. Enter the PIN code into the system, and then turn on the engine.

It is essential to place the immobiliser in a concealed area, so that it is impossible for thieves to access. If you can, place the unit behind your dash with cable ties. Make sure all connections are properly insulated and can’t be altered by thieves. Make sure that the location of the mounting is secured.

It is compatible with a variety of vehicles

The ghost immobiliser is a highly efficient security device that will help prevent car theft. It prevents your vehicle from starting until you enter the correct pin code. This code can be generated by pressing a series of existing buttons on your steering wheel, door panel or central console. The immobiliser is safe from tampering and can be reprogrammed by the owner at any time. It also protects against key-cloning and hacking.

While some drivers might attempt to install the Ghost Immobiliser on their own, it is recommended that you hire an expert. This is because the process of installing it is complex, and errors could cause the device to be ineffective or even harm your vehicle. Additionally, DIY installation could void warranties for both the Ghost Immobiliser and your vehicle.

The best way to start is by obtaining the wiring diagram of your vehicle model. This will give you an outline of where to find the CAN H wires and CANL wires which are used to power the immobiliser. Once you have identified these wires mark them so that they do not get disconnected during the installation process. Also, ensure that you select a secure and safe grounding point for the system.

It is a good idea to test the immobiliser after the wires have been connected to make sure that everything is working properly. After that, enter the PIN code to start your engine and see if it runs properly. It is recommended to test the immobiliser on a regular basis to ensure that it functions as intended.

Another benefit of the ghost immobiliser is that it does not require any LED indicators or key fobs it can be disarmed by pressing a specific sequence of buttons on your steering wheel, door panel, or the centre console. The immobiliser is also tamper-proof and doesn’t leave any trace of installation behind making it difficult for thieves to identify or disable. Additionally, it can be used to bolster the security of your vehicle in the event of a burglary, and is recommended by many insurance companies.

Easy to install

The Ghost immobiliser is an sophisticated device that helps keep your vehicle secure from the most skilled thieves. It stops your car from starting until a specific PIN or sequence is entered along with the key fob. This stops hackers from cloning or hacking or even theft of keys. Thieves can’t take your car away. It employs a variety of sensors to detect attempts to drive away and it can notify the owner or the police in the case of altering.

Installing a ghost immobiliser can be a challenge, especially for those with no experience in installing alarms or other security systems. Utilizing the appropriate tools and materials is crucial to an effective installation. A multimeter is helpful for verifying electrical values. Insulation cable ties and tape are also helpful in protecting connections. The Ghost immobiliser user manual offers specific instructions that are tailored to the specific model and wiring of your car.

It is important to examine the locations of the wires for CAN H andL during the installation to ensure precision. They are crucial for powering the immobiliser. Errors could lead to an ineffective system or even failure. Mark the wires using tape or labels so you can track them. Also, you must determine the source of consistent 12V power as well as an earthing point.

Once you’ve located the correct place, you can begin assembling the ghost immobiliser. To avoid short circuits or accidental airbag deployment, you will need to disconnect the battery first. Then, you can begin connecting the wires. Make sure to adhere to the directions in the user manual to ensure a smooth and secure installation.

Once you’ve completed the wiring after you’ve completed the wiring, connect your Ghost immobiliser via CAN to the engine control unit. It will be a challenge for thieves to steal the device, as the device is directly connected to the engine control unit, to remove or disable it. It’s also tamper-proof and the only way to disable it is by entering a personal pin number. The pin code will only be used by the owner of the vehicle as well as the installer.

You can also make use of the Ghost immobiliser as a temporary solution to let someone else drive your car temporarily for instance, when you’re away for work or require to get a service. This feature is known as Service/Valet mode. You can enable it with an app on your mobile or key fob.