Autowatch Ghost Immobiliser Installation

The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It’s discreet and does not have LED indicators or key fobs and is hidden in the vehicle’s wiring.

The user may also turn off the system temporarily using Transport Mode when renting their car. This guide will walk you through the steps of installing the Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning and relay attacks. The system is linked directly to the ECU of your vehicle and secured by a PIN code that you choose. It is not detected by thieves using diagnostic scanners or other modern methods. It cannot be disabled using circuit cuts.

The system is easy to use, however professional installation is advised to ensure a perfect connection with the ECU of your vehicle. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the security package for your vehicle.

To prevent an accidental deployment of airbags or short circuits The installer must first disconnect your battery. After that the installer is able to safely begin work. Basic hand tools are useful for making precise connections and a multimeter can be used to verify electrical values and safety. Insulation tape and cable tie are vital to secure connections and keep wiring neat. The Ghost Immobiliser user manual will give specific instructions that are specifically tailored to your specific model.

During the installation, it is crucial to select a grounding point that’s free of paint and debris. Installers must also ensure that the immobiliser’s wires CAN H & CAN L are connected to the correct ECU ports. Depending on the model, these wires could need to be soldered or plugged into. To ensure auto ghost immobiliser and durable connection it is recommended that you choose a high-quality plug.

After the installation is completed, the customer can activate the Transport Mode. This allows mechanics or valet parking to use the vehicle, without knowing the pin code. To do this, the customer has to press the button for service on the dashboard five times in the space of two seconds. After that the system will confirm with 5 indication signals.

The Autowatch Ghost 2 is a highly effective immobiliser that’s TASSA verified and Thatcham approved. It’s a smart option for those who regularly rents their vehicle on platforms like Turo. Having an immobiliser can also lower insurance costs, as it greatly reduces the chance of theft.

Getting Started

If you are seeking a solution to safeguard your vehicle from theft You can’t go wrong with an autowatch ghost immobiliser. It will stop your car from starting even the theft or copies the key. It’s possible because of its advanced technology that prevents the engine from starting until the right PIN code has been entered.

The device connects to the CAN bus network of your vehicle which allows it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and the steering wheel to create a unique sequence that only you can identify which makes it impossible for someone else to start your car. This is the most secure way to protect your pride and joy. It will not lose its value should you ever decide to sell it.

Installing a ghost immobiliser is an easy procedure, but it is important to follow the steps carefully to avoid issues with electricity and system malfunctions. You must first find a 12V power source and a suitable grounding for the car’s chassis. After that, you can begin connecting the wires for the immobiliser. Make use of high-quality connectors and soldering techniques for a secure connection. Also, ensure that you insulate the connections by using heat shrink tubing or insulation tape to protect them from electrical short circuits and other problems.

Once the wires are connected, you can connect the battery and begin the engine to check whether the immobiliser works. When everything is functioning correctly then you can put it in a secure location beneath the dash or anywhere else in the vehicle. Be sure to hide it well so that thieves can’t get it into a compromising position.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it meets the highest standards of security and is an excellent protection against car thieves. It is impervious to hacking and key cloning and is not able to be disabled without the code. The device is simple to use and can be set into a service valet setting so that your vehicle won’t be activated if you take it to an MOT or for servicing.

Wiring

The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It communicates with your vehicle’s ECU and directly connects to its CAN bus. The Ghost Immobiliser does not interfere with the factory settings of your car unlike other aftermarket systems that require the removal of circuit elements.

It’s also completely undetectable to thieves using diagnostic scanners. This is because the system doesn’t send and receive radio frequency signals and it relies on the CAN data to communicate with your ECU. It doesn’t even require any modifications to your current key fobs.

Enter the sequence to disarm (either two or one button) and then switch on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to verify that you’ve entered the correct code. Now you can start your vehicle and drive safely.

Once installed The Ghost Immobiliser can secure your vehicle from hacking and key cloning and will also protect the value of your car’s pride and joy. In Transport Mode you can temporarily disable the Ghost Immobiliser when you have to hand your car to service or valet parking.

You’ll require a constant power source (12V) in addition to an earthing point to complete the installation of a Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. Cable ties are also suggested for bundling and secure the wires. This will reduce the possibility of theft by potential thieves. To avoid committing mistakes, double-check these points and mark them using a label or tape. Verify every connection for signs that they’re wearing out. Be sure to ensure that all connections are firmly in place, and properly sealed. Finally, don’t forget to test the Ghost Immobiliser after installation is complete. This will make sure that the unit is functioning properly and that all connections are secure and insulated. If there are any issues, you must be certain to fix them immediately.

Testing

The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your car’s ECU to prevent the motor from starting without authorization. Its innovative technology safeguards your vehicle from hacking and key cloning as well as other methods commonly used by thieves to steal cars. The Ghost also works in tandem with existing alarm and tracking systems to provide the best protection for your vehicle. The Ghost’s unparalleled features, paired with its secluded design makes it a sought-after choice for car enthusiasts and security conscious drivers.

In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow all steps of the installation process. The best way to begin is to look over the wiring diagram of your vehicle that serves as a guideline for locating and connecting the wires required. After that, you’ll need determine the power source and grounding points. Once you’ve located them, you’ll have to mark them to make them easily identifiable when installing. It’s essential to use high-quality materials and tools. Hand tools are essential to assist you in making precise connections. A multimeter will verify electrical values, and also ensure security. Insulation tape and cable tie will keep all connections neat. Also, a user’s guide will give specific guidelines specifically tailored to your Ghost model.

It is crucial to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This test will verify that the immobiliser is working as it should and will stop vehicle starts that are not authorized. It’s recommended to perform this procedure regularly as part of your regular inspections of your vehicle to ensure that the system is operating properly.

After the installation is completed, you can begin driving your car with confidence. The Ghost will safeguard your pride and joy from would-be car thieves. It will ensure that no one can take your car away if they do not have the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker, which detects attempts at theft or tampering. This lets you locate your car if it’s stolen.

The Ghost can be used on a wide range of vehicles and is compatible with most major brands. Monty’s Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, which ensures that we adhere to strict standards for installing our products. This assures customers, insurance companies, and law enforcement agencies that all installations are performed safely and in a safe manner.