Autowatch Ghost Immobiliser Installation

The Ghost is the UK’s most advanced aftermarket CAN bus immobiliser. It is discreet and does not have LED indicators or key fobs, and is concealed in the wiring of your vehicle.

It also allows the user to disable the system temporarily by using Transport Mode in the event of renting out their vehicle. This guide will guide you through the installation of a Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from key cloning, hacking and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a pin code you select. It is inaccessible to thieves using diagnostic scanners and other modern methods. It cannot be disabled by cutting circuits.

The system is simple to use, but professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. Installers approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complement the protection package for your vehicle.

The first step is to disconnect your battery to prevent accidental airbag deployment or short circuits. Once the battery is disconnected, the installer may start working safely. Hand tools are the most basic to be used for precise connections. A multimeter can be used to verify electrical values. Cable ties and insulation tape are also vital for protecting connections and keeping wiring neat. The Ghost Immobiliser user manual will provide specific instructions specific to your particular model.

During the installation, it is crucial to select a grounding point that’s free of debris and paint. The installer should ensure that the immobiliser’s H and CAN L wires are connected to the correct ports on the vehicle’s ECU. Depending on the model, these wires might need to be soldered or plugged into. To ensure a stable and durable connection it is recommended you choose a high-quality plug.

Transport Mode can be activated by the customer after the installation is completed. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. The customer has to press the icon for service on the dashboard five times over two seconds. After this is done the system will confirm with 5 signal indicators.

The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It’s a great option for those who rent out their vehicles frequently through platforms like Turo. Having an immobiliser can also lower insurance costs since it greatly reduces the chance of theft.

Getting Started

It’s not difficult to come up using an autowatch immobiliser for those who want to safeguard your car from thieves. It protects your vehicle from being started even when a criminal steals or copies the key. It’s possible due to its advanced technology that stops the engine from starting until the correct PIN code has been entered.

The device connects to the vehicle’s bus network, CAN and allows direct communication with the ECU. It uses existing buttons on the dashboard and steering wheel to create a unique sequence only you can identify and makes it impossible for someone else to start your vehicle. This is the ultimate security system to protect your most precious possessions, keeping its value intact when you want to sell it in the future.

Installing Ghost’s immobiliser is straightforward, but you must follow the steps to avoid electrical issues and malfunctions of the system. You must first locate a power supply of 12V and a good grounding on the chassis of your car. Then, you can begin connecting the wires for the immobiliser. Use high-quality connectors and soldering techniques for a secure connection. Also, be sure to cover the connections by using heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other problems.

After the wires are connected, you are able to connect the battery and start the engine to test whether the immobiliser works. When everything is functioning correctly you can place it in a safe location under the dash or elsewhere in the vehicle. Be sure to cover it well to prevent thieves from getting into it.

The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a high-quality deterrent to car burglars. It is a superior defense against key cloning, hacking and relay attacks, and cannot be disabled without knowing the code. The device is also simple to use and can be put into an auto valet mode so that your automobile isn’t activated if you take it in for servicing or an MOT.

Wiring

The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It connects directly to the vehicle’s CAN bus network and communicates with the ECU, making it virtually undetectable to your car. The Ghost Immobiliser does not interfere with the factory settings of your car unlike other aftermarket systems that require the removal of circuit elements.

It’s also completely undetectable to thieves using diagnostic scanners. The system does not send or receive radio frequency signals, but instead uses CAN data to communication with your ECU. It doesn’t even require any modifications to your existing key fobs.

Enter your sequence for disarming (either two or one button) and then turn on the ignition in your car to use Ghost Immobiliser. The indicator will flash two times to confirm that you’ve entered the correct code. You can now begin driving your car safely.

Once installed, Ghost Immobiliser protects your car against hacking or key cloning, while protecting its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you need to hand your car over for service or valet park.

You’ll need a constant power source (12V) as well as a grounding source to complete the installation of a Ghost immobiliser. Make sure both are properly insulated and can be touched. It’s also recommended to use cable ties to tie and secure the wires, as this will decrease the chance of being tampered with by thieves. Make sure you check the exact locations of these points to avoid committing a mistake and mark them with the help of tape or a label. Check all connections for signs they are wearing out. Connections that are loose can cause malfunctions in the system, so make sure they’re securely in place and properly insulated. Make linked website to test your Ghost Immobiliser once the installation is completed. This will make sure that the unit is operating correctly and that all connections are safe and well-insulated. Be sure to correct any issues as soon as they arise.

Testing

The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your vehicle’s ECU to prevent unauthorised engine start. Its innovative technology safeguards your vehicle from hacking and key cloning as well as other common methods used by thieves to steal cars. The Ghost also works in conjunction with other alarm and tracking systems to offer the best protection for your vehicle. The Ghost’s unparalleled features and discreet design make it a popular choice for car enthusiasts and security-conscious motorists alike.

To ensure proper integration of the Ghost Immobiliser, it is essential to follow all steps of the installation process. Consult the wiring diagram for the vehicle to assist you in locating and connecting the wires. Then, you’ll need to determine the power source and grounding points. Once you’ve located them, you’ll be required to mark the points so that they are easily identifiable during installation. In addition, it is important to use top-quality tools and materials. Basic hand tools can help to make precise connections, while a multimeter will confirm electrical values and guarantee security. Cable tie and insulation tape ensure that all connections are neat. Also, a user’s guide will provide specific instructions tailored to your Ghost model.

Before you begin installing it is important to test the system by entering the PIN code, then starting the vehicle. This will ensure that the immobiliser is working according to plan, and prevents unauthorised vehicle start-ups. This procedure should be carried out regularly as part your regular vehicle inspections in order to ensure the system is working properly.

After the installation is completed After the installation is completed, you are able to drive your car with confidence. The Ghost will help keep your pride and joy safe from would-be thieves and ensure that nobody is able to take off with your vehicle without the correct PIN code. The Ghost can also be paired with a Thatcham-approved tracker to identify any attempts to tamper with or steal your vehicle that could lead to the location of your vehicle if it is stolen.

The Ghost is compatible with a variety of automobiles, including those from most major manufacturers. If you are interested in securing your car using this advanced device, contact Monty’s Locksmith today to learn more about our installation and maintenance options. We are a TASSA Installer who is registered, a certification that guarantees that we adhere to strict standards and procedures for installing our products. This assures customers insurance companies, customers, and law enforcement agencies that installations are carried out safely and in a safe manner.