Autowatch Ghost Immobiliser Installation

The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It is discreet, does not use LED indicators or key fobs, and is hidden in the vehicle’s wiring.

It also allows the user to turn off the system temporarily by using Transport Mode in the event of renting their vehicle. This guide will guide you through the process of installing the Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning attacks and relay attacks. The system is linked directly to the ECU of your vehicle and protected by a pin code that you choose. It’s inaccessible to thieves using diagnostic scanners or other modern methods, and is not able to be disabled through circuit cuts.

The system is easy to use, but professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. Installers certified by Thatcham can assist you with the installation and programing of your Ghost system. They can also suggest an alarm or tracking system to complete the security package for your vehicle.

The first step is to disconnect the battery to prevent the possibility of airbag deployment and short circuits. Once the battery is disconnected, the installer can start working safely. Hand tools are the most basic to be used for precise connections. A multimeter is useful to test electrical values. Cable ties and insulation tape are also vital for protecting connections and keeping wiring neat. The Ghost Immobiliser user’s guide will provide specific instructions specifically tailored to your specific model.

During the installation, it is crucial to select a grounding point that’s free of paint and debris. Installers should also make sure that the immobiliser’s wires, CAN H and the CAN L are connected to the appropriate ECU ports. Based on the model, these wires could need to be soldered or plugged in. A high-quality connector is recommended to ensure a long-lasting and reliable connection.

Transport Mode can be turned on by the client after the installation is completed. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. To accomplish this, the user must press the service button on the dashboard 5 times in the space of two seconds. After this is done the system will confirm with 5 signal indicators.

The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It’s a great option for those who rent out their vehicles often on platforms like Turo. An immobiliser can lower insurance costs since it significantly decreases the risk of theft.

Getting Started

It’s not difficult to come up with an autowatch immobiliser for those who want to safeguard your vehicle from theft. The device stops your car from running even if someone steals or copies your key. This is due to its high-tech technology, which is designed to stop the car’s engine from starting unless the correct PIN code is entered.

The device connects to the vehicle’s bus network CAN which allows direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence, which only you are aware of. This makes it impossible for anyone else to start your car. This is the best security system that will safeguard your pride and joy, keeping its value intact when you want to sell it in the future.

Installing Ghost’s immobiliser is straightforward, but you must follow the instructions to avoid electrical issues and malfunctions in the system. You must first locate a power supply of 12V and a suitable grounding for the car’s chassis. Then, you can start connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques for a secure connection. Also, make sure to protect the connections by insulating them with heat shrink tubing or insulation tape to shield them from electrical short circuits and other issues.

Once the wires are connected, you can plug in the battery and start the engine to test whether the immobiliser works. After you’ve confirmed that everything is functioning properly then you can put the immobiliser in a safe position inside the vehicle. Be sure to conceal it well so that thieves can’t get it into a compromising position.

The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a top-quality deterrent to car burglars. It offers superior protection against key cloning, hacking and relay attacks, and it isn’t able to be disabled unless you know the code. The device is simple to use, and it can be set to a service valet setting so that your vehicle won’t be activated if you take it to an MOT or for servicing.

Wiring

The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It is directly connected to the vehicle’s CAN bus network and communicates with the ECU and ECU, making it a virtually undetectable addition to your vehicle. In contrast to other aftermarket systems that require the removal of circuit components The Ghost Immobiliser does not interfere with any of the factory settings for your vehicle.

It’s also undetectable to thieves using diagnostic scanners. The system doesn’t transmit or receive radio frequency signals but instead uses CAN data to communication with your ECU. It also doesn’t require modifications to your existing key fobs.

To make use of the Ghost Immobiliser simply switch on the ignition in your car and enter your disarm sequence (either one or two buttons). The indicator will flash twice to verify that you’ve entered the correct code. Once you’ve verified this, you’re able to start your vehicle and leave with peace of mind.

Once installed, Ghost Immobiliser protects your car against key cloning or hacking while also protecting its value. If you ever need to surrender your car to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.

You’ll require a continuous power source (12V) and an earthing point to complete the installation of a Ghost immobiliser. Be sure that they are well-insulated and safe to touch. It’s also recommended to use cable ties to bundle and secure the wires, as this reduces the risk of being tampered with by thieves. Make sure you check the exact position of these points to avoid making mistakes and mark them with the help of tape or a label. Check every connection for signs that they’re wearing out. Connectors that are loose could cause problems with the system, so be certain that they are securely in place and securely insulated. Don’t forget to test the Ghost Immobiliser after the installation is completed. This will confirm that the unit is working properly and that all connections and insulation are secure. Make sure to address any issues immediately.

Testing

The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your vehicle’s ECU to stop unauthorised motor starting. The innovative technology protects your vehicle against key cloning and hacking as well as other methods employed by thieves to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to provide the best protection for your vehicle. This system’s unmatched features and secluded design make it a preferred option for car enthusiasts and security-conscious drivers alike.

It is crucial to follow the steps of installation in order to ensure the complete integration of the Ghost Immobiliser. A good starting point is to refer to the wiring diagram for your vehicle that will serve as a guideline for locating and connecting the wires required. You’ll need to determine the grounding and power sources. Once you’ve located them, you’ll need to mark the points so that they are easily identifiable when installing. Finally, it’s essential to use high-quality tools and materials. Basic hand tools will aid in making precise connections. A multimeter can verify electrical values, and also ensure safety. Insulation tape and cable ties will keep the connections neat and tidy. A Ghost-specific user’s guide is also available.

It is crucial to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This test will verify that the immobiliser works as intended and prevent unauthorised vehicle starts. It is recommended that you perform this procedure regularly as part of your regular inspections of the vehicle to ensure the system is always functioning correctly.

After the installation has been completed, you can start driving your vehicle with confidence. The Ghost will help keep your precious possessions secure from thieves who might steal it and ensure that nobody is able to escape with your car without the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts at theft or tampering. This allows you to locate your car if it’s stolen.

The Ghost is compatible with a wide variety of vehicles, including those from the majority of major manufacturers. Monty’s Locksmith can help you secure your vehicle with this innovative device. Contact us today to find out more about our service and installation options. The Keylab are a TASSA Registered installer, a certification that guarantees that we follow strict guidelines and procedures for installing our products. This assures customers, insurance companies, and law enforcement agencies that installations are carried out safely and in a safe manner.